TL 260

TL 260

Copper Anti-Seize Compound

TL-260 COPPER ANTI -SEIZE is a smooth, non-separating formula consisting of lithium soap thicken grease into which is compounded very fine flaked copper as well as graphite lubricant and corrosion fighting inhibitors. This high performance grease and solid additives provide extreme pressure lubricating properties that prevent galling and cold welding and at the same time prevent water wash out and galvanic from electrolysis of road salt, acid rain or salt water.

Typical Uses

  • TL-260 Copper Anti-Seize Compound can be used as a lubricant, a sealer, a break in lubricant or a tapping compound on plastics as well as metal. Surface are best cleaned before application as grit or low quality oil or grease may be present and best performance is required. The reduction in assembly friction increases torque tension by approximately 20 %. Use on threaded part, bushing, gear, valve stems, chains, sprockets, levers, hinges, pivots, rollers, heat exchanger or manifold bolts or as a gasket release agent, etc. 

    Note: This product is not recommended for pure oxygen systems.

Features

  • TL-260 provides protection as a high temperature anti-seize and extreme pressure lubricant.
  • TL-260 stops corrosion, galling and seizure between metal parts.
  • TL-260 performs to 2000 °F.
  • TL-260 Copper Anti-Seize Compound is non-hardening and has exceptional thermal stability.
  • The particles present are inert and will not evaporate at extreme temperatures and their heat resistant quality will prevent carbon fusion and seizure at temperatures approaching 2000 °F. This anti-seize compound does not contain lead, molybdenum disulfate or halogen compounds.


TL 260

Mcinter World Wide
©  2015 McInter Vietnam Co.,Ltd.
All Rights Reserved
307 Tinh Lo 10, P.An Lac, Q.Binh Tan, TPHCM, VIETNAM
Emailtl.lubricant@gmail.com

 Tel: 08-22122168       Fax: 08-36200278      

Hotline: 090 163 0088